ICPDASジャパン総合目次カテゴリー目次ICPDASジャパン問い合わせ製品詳細ページ
 アイコンの内容は詳細ページよりダウンロード頂けます
ViewPAC-2000/4000シリーズ(ISaGRAFベース)

VP-25W7、VP-23W7、VP-4137
   
VP-25W7 Windows CE5.0 エンベデッドISaGRAF Ver.3 SoftLogic
VP-25W7


ハイライトのご紹介

・PXA270、520MHz CPU
・Windows CE5.0
・エンベデッドISaGRAF Ver.3 SoftLogic (IEC 61131-3)
・強固なリアルタイム能力
・3個のI/Oスロット
・IP65 準拠フロントパネル
・3.5"/5.7"/10.4" TFT LCD
・Modbus RTU/TCP (マスター、スレーブ)
・Soft-GRAF HMI
・オーディオはマクロフォン入力とイヤホン出力
・動作温度:-20 〜 70 ℃
VP-23W7 Windows CE5.0 エンベデッドISaGRAF Ver.3 SoftLogic
VP-23W7
VP-4137 Windows CE5.0 エンベデッドISaGRAF Ver.3 SoftLogic
VP-4137
Windows7とWindow8と共に64ビットのPCにISaGRAFをインストールできません。
より良いSoftLogicソフトウェアがあります。
 ViewPACは1ユニット(PAC + HMI)でカラー・グラフィック表示、およびキーパッドをPAC (Programmable Automation Controller) に結合します。
 それはWindows CE.NETオペレーティングシステムを動かすPXA270 CPU(520MHz)、様々な通信(USB、イーサネット、RS-232/485)、拡張I/Oモジュール用の3スロット、3.5"/5.7" TFT LCD、およびゴムキーパッドを備えています。
 オペレーティングシステムWindows CE.NET 5.0はハードのリアルタイム能力、小さいコアサイズ、早い立ち上がりスピード、深いレベルでの割り込みの取り扱い、確実なコントロール、低価格を含む多くの優位性を持っています。
 ViewPACの実行しているWindows CE.NET 5.0はISaGRAF、Visual Basic.NET、Visual C#、Embedded Visual C++、SCADAソフトウェア、Soft PLC… などのPCベースの制御ソフトウェアを動かす能力をそれに与えます。
 WindowsCE5.0をWinPACデバイスで実行する利点はリアルタイムの能力を、小さいコアサイズ、速いブート速度、より深いレベルの割込み処理達成可能な決定論的なコントロールを含みます。また、WinPACデバイスはISaGRAFとPCベースの制御ソフトウェアVisual Basic.NET、Visual C#などが実行できます。伝統的なプログラマブル論理コントローラとWindowsのできるPCの両方の最も良い特徴のすべてを提供します。
The ViewPAC Series VP-2xW7/4xx7 support Soft-GRAF HMI:
Running HMI and Control Logic in the Same PAC
・Windows CE.NET 5.0内蔵
・ISaGRAF Ver.3ソフトロジック内蔵
・ IEC 61131-3 スタンダードをサポート
・Web HMI機能をサポート
・最大1MB ISaGRAFコードサイズ許可
・PXA 270 CPU (32ビット、520MHz)
・128 MB SDRAMと96 MBフラッシュ
・IP65 準拠のフロントパネル
・ゴムキーパッド
・3.5"/5.7" TFT LCD (5.7" LCDはタッチパネル付き)
・オーディオはマイク入力とライン出力
・3スロットハイプロファイルI/Oモジュール
・10/100Mイーサネットポート(デフォルトはON)
・シリアルポート x2個
HART-ソリューション データベースアプリケーション ソフト-GRAF:豊かなHMI創成
ISaGRAF PAC connects the Smart Meter
Stress Monitoring Application of Constructions
Redundant Communication System
eLogger HMI Application
Remote I/O Modules and Expansion module/board
ZigBee Wireless Solution
GPS Applications: ISaGRAF PAC plus I-87211W or GPS-721
Integrate with CAN/CANopen Devices and Sensors
Send Email with One Attached File
An Easy Way to Program the Fast FRnet Remote I/O Modules
Data Acquisition Auto-Report System
Redundant System with RS-485 I/O
Modbus RTU/TCP Slave Ports
Modbus RTU/ASCII Master Ports
Modbus TCP/IP Master
SMS: Short Message Service
Multiple Web HMI - Monitor & Control Everywhere!
Motion Control
Data Recorder and Data Logger
Data Exchange: Ebus
Detect I-8K/I-87K I/O status
VIP Communication Security
 
Models VP-23W7 VP-25W7 VP-4137
System Software
OS Windows CE 5.0
.Net Compact Framework 3.5
Embedded Service FTP server, Web server (supports VB script, JAVA script), Embedded SQL server
SDK Provided Dll for eVC, Dll for Visual Studio.Net 2005/2008
Multilanguage Support English, German, French, Spanish, Russian, Italian, Korean, Simplified Chinese, Traditional Chinese
Development Software
ISaGRAF
Software
ISaGRAF Ver.3 IEC 61131-3 standard
Languages LD, ST, FBD, SFC, IL & FC;
Support Soft-GRAF HMI: XP-8xx7-CE6, XP-8xx7-Atom-CE6, WP-8xx7/5xx7 and VP-2xW7/4xx7 PAC
Max. Code Size 1 MB
Scan Time 3 ~ 15 ms for normal program
15 ~ 50 ms (or more)for complex or large program
Non-ISaGRAF Options: MS eVC++ 4.0 or VS .NET 2005/2008 (VB.NET, C# .NET)
Web Service
Web HMI PC running Internet Explorer can monitor/control PAC via Internet/modem
Security Support three-level username and password protection. (high/middle/low)
CPU Module
CPU PXA270, 520 MHz
SDRAM 128 MB
Flash 96 MB 128 MB
Expansion Flash Memory microSD socket with one microSD card (support up to 32 GB)
Dual Battery Backup SRAM 512 KB; data valid up to 5 years (for retain variables)
EEPROM 16 KB
RTC (Real Time Clock) Provide second, minute, hour, date, day of week, month, year
64-bit Hardware Serial Number Yes, for Software Copy Protection
Dual Watchdog Timers Yes (0.8 second)
Rotary Switch Yes (0 ~ 9)
Communication Interface
Ethernet RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, LED indicators)
USB 1.1 (host) 1 2
USB 1.1 (client) - 1
COM 0 Internal communication with the high profile I-87K series modules in slots
COM 2 RS-485 (Data+, Data-) with internal self-tuner ASIC; 2500 VDC isolated
COM 3 RS-232 (RxD, TxD, CTS, RTS, DSR, DTR, CD, RI and GND); Non-isolated
MMI (Man Machine Interface)
LCD (Resolution) 3.5” TFT (320 x 240) 5.7” TFT (640 x 480) 10.4” TFT (800 x 600)
Touch Panel - Yes
Rubber Keypad 24 keys 6 Keys -
Audio Microphone-In and Earphone-Out Earphone-Out
LED Indicators 3 Dual-Color LEDs
(PWR, RUN, LAN1, L1, L2, L3; L1 ~ L3 for User Programmable)
2 Dual-Color LEDs (PWR, RUN)
I/O Expansion Slots
Slot Number 3
Note: For High Profile I-8K and I-87K Modules Only
Mechanical
Dimensions (W x L x H) 182 mm x 158 mm x 125 mm 293 mm x 231 mm x 129 mm
Installation Panel Mounting
Ingress Protection Front panel: IP65
Environmental
Operating Temperature -20 ~ +70°C
Storage Temperature -30 ~ +80°C
Ambient Relative Humidity 10 ~ 90% RH (non-condensing)
Power
Input Range +10 ~ +30 VDC
Isolation 1 kV
Capacity 12.5 W
Consumption 7.2 W 8.5 W
Protocols  (Note that certain protocols require optional devices)
NET ID 1 ~ 255, user-assigned by software
Modbus TCP/IP Master Link to a max. of 100 devices that support the Standard Modbus TCP/IP Slave protocol (FAQ-113)
Modbus RTU/ASCII Master A max. of 10 ports: COM2, 3 and COM5 ~ 14. (To connect to other Modbus Slave devices).
Support Multi-port. 
(*)
Modbus RTU Slave A max. of 5 Ports: one of COM2/3, COM5 ~ 8.
(For connecting ISaGRAF, PC/ HMI/ OPC Server and HMI panels.) 
(*)
Modbus TCP/IP Slave LAN1 and optional 2nd Ethernet Port in I-8135W support total up to 32 connections for connecting ISaGRAF and PC/HMI. If one of the Ethernet port malfunctions, the other one can still be used to connect to the PC/HMI.
Web HMI Protocol Ethernet Ports for connecting a PC running Internet Explorer.
User-defined Protocol Custom protocols can be applied at COM2 ~ 3 and COM5 ~ 14 using Serial communication function blocks (*).
I-7000 & I-87K RS-485
Remote I/O
One of COM2 or COM3 supports I-7000 I/O modules, I-87K base + I-87K Serial I/O boards, or RU-87Pn + I-87K High Profile I/O boards as remote I/O. A max. of 255 I-7000/87K remote I/O modules can connect to one PAC
M-7000 Series Modbus I/O A max. of 10 RS-485 ports: COM2, 3, 5 ~ 14. Each port can connect to up to 32 M-7000 modules. (With optional I-7510 repeater connected can connect to up to more than 32 M-7000 Modules)  (*)
Modbus TCP/IP I/O Supports ICP DAS Ethernet I/O : I-8KE4-MTCP and I-8KE8-MTCP  (FAQ-042).
If LAN1 malfunctions, it will automatically switch to the 2nd Ethernet port (in optional I-8135W card) to continuously work. (The IP address for LAN1 and the 2nd Ethernet's IP should be set in the same IP domain)
FRnet I/O Enable a max. of 3 pcs. I-8172W boards in slot 0~2 to be used to connect to FRnet I/O modules, such as FR-2053, FR-2057, FR-32R, FR-32P. Each I-8172W board can link to a max. of 256 DI plus 256 DO channels. (FAQ-048, FAQ-154).
Send Email Provide functions to send email with a single attached file via the Ethernet port.
Ebus Used to exchange data between ICP DAS ISaGRAF Ethernet PACs via the Ethernet port.
(LAN1 Port only)
SMS: Short Message Service Either COM3 or COM5 can link to a GSM Modem to support SMS. The user can request data/control the controller via a cellular phone. The controller can also send data and alarms to the user’s cellular phone.(*)  Optional GSM Modem: GTM-201-RS232 (850/900/1800/1900 GSM/GPRS External Modem)
MMICON/LCD COM3 or COM5 supports the ICP DAS MMICON. (*) The MMICON is featured with a 240 x 64 dot LCD & a 4 x 4 Keyboard to display picture, string, integer, float, & input a char, string, integer & float.
UDP Server & UDP Client :
Exchange Message & Auto-report
LAN1 or the 2nd Ethernet (in optional I-8135W card) supports the UDP Server and UDP Client protocols allowing messages to be sent/received to/from a PC/HMI or other device. For example, data can be automatically reported to the InduSoft’s RXTX driver.
TCP Client :
Exchange Message & Auto-report
LAN1 or the 2nd Ethernet port (in optional I-8135W card) supports the TCP Client protocol allowing messages to be sent/received to/from a PC/HMI or other device that supports the TCP server protocol. For example, data can be automatically reported to the InduSoft’s RXTX driver, or to connect a location camera.
GPRS/SMS Enable the I-8212W (2G/3G) card allowing short messages to be sent/received to/from or to access a dial up connection to link to the Internet and using a GPRS connection to send an email or communicate with remote stations using the "FTP Client" (FAQ-151) or the "TCP Client"/"UDP Server"/"UDP Client" (FAQ-143) protocols.
SQL Client Support for the SQL Client function that allows data to be written (or read from) a Microsoft SQL Server (2000 SP3, 2005, 2008).
Hot-Swap and Redundant System Must enable the 2nd Ethernet port in the optional I-8135W card.
This redundant system has setup two “Active IP” address point to the active VP-2xW7/2xW6 's LAN1 and 2nd Ethernet ports always. One or two or more PC / HMI / SCADA can communicate with this redundant system via one of the two given active IP. So the PC / HMI / SCADA can access to the system easily without any notice about which VP-2xW7/2xW6 is currently active.

Moreover, the new redundant system can integrate with the RU-87P4 and RU-87P8 expansion unit plus the I-87K high-profile I/O cards to support the hot-swap application. If the I/O card is damaged, the maintenance person just takes one good-card with same model number to hot-swap the damaged one without stopping this redundant system.  (FAQ-093)
CAN/CANopen COM3 or COM5 ~ COM14 can connect to one I-7530 (converter: RS-232 to CAN) to support CAN/CANopen devices and sensors. One PAC supports a max. of 10 RS-232 ports to connect a max. of 10 I-7530. (*)   (FAQ-086)
CANopen Master Enable the I-8123W CANopen Master card to connect to other CANopen Slave devices.  
(FAQ-145)
HART Solutions Enable I-87H17W modules in slots 0 to 2 used to communicate with other HART devices.
FTP Client  Enable the FTP Client to upload files from the PAC to a remote FTP server on a PC. (FAQ-151)
The Soft-GRAF g_Alarm and g_Logger1 HMI objects also support FTP Client. (FAQ-146)
Soft-GRAF HMI Provide support for the Soft-GRAF HMI. The user can design the HMI screen using the Soft-GRAF Studio on the PC and then download it to the PAC to display the HMI on the PAC. (FAQ-146)
Optional I/O Functions  (Refer to the ISaGRAF PAC I/O Selection Guide for I/O Module list)
PWM
Output
High Speed PWM Module I-7088, I-8088W, I-87088W:
8-ch. PWM outputs, software support 1 Hz ~ 100 kHz (non-continuous), duty: 0.1 ~ 99.9%
DO Module as PWM 8-ch. max. 250 Hz max. For Off=2 & On=2 ms.
Output square curve: Off: 2 ~ 32766 ms, On: 2 ~ 32766 ms.
Optional DO Boards: I-8037W, 8041W, 8041AW, 8042W, 8050W, 8054W, 8055W, 8056W, 8057W, 8060W, 8063W, 8064W, 8068W, 8069W.
(Relay Output boards cannot generate fast square wave)
Counter, Encoder, Frequency Parallel DI Counter 8-ch. max. For 1 controller. Counter val: 32-bit. 250 Hz max. Min. ON & OFF width must > 2 ms.
Optional DI boards: I-8040W, 8040PW, 8042W, 8046W, 8048W, 8050W, 8051W, 8052W, 8053W, 8053PW, 8054W, 8055W, 8058W, 8063W.
Serial DI Counter Counter input: 100 Hz max. Counter value: 0 ~ 65535 (16-bit)
Optional serial I-87K DI boards: I-87040W, 87046W, 87051W, 87052W, 87053W, 87053W-A5, 87054W, 87055W, 87058W, 87059W, 87063W.
Remote DI Counter All remote I-7K/I-87K DI modules support counters. 100 Hz max.  Value: 0 ~ 65535
High Speed Counter I-87082W: 100 kHz max. 32 bit;
I-8084W: 250 kHz max. 32 bit
Encoder I-8093W: 3-axis Encoder Module, max. 1M Hz for quadrant input mode, max. 4 MHz for
              pulse/direction and cw/ccw input mode. (FAQ-112)
I-8084W: 250 kHz max., 4-ch encoder, pulse/direction or up/down or A/B phase
              (Quad. mode). Not support Encoder Z-index. (FAQ-100)
Frequency I-87082W: 2-ch, 1 Hz ~ 100 kHz;
I-87088W: 8-ch, 0.1 Hz ~ 500 kHz;
I-8084W: 8-ch, 1 Hz ~ 250 kHz;
Motion Motion Control one I-8091W (2-axis) or two I-8091W (4-axis) can do motion control. only one I-8091W can do X-Y dependent motion.
Port Second  Ethernet VP-2xW7/2xW6/4137 can add one optional I-8135W card in its slot 0 ~ 2 to expand the second Ethernet port.
* Note: The COM5 ~ COM14 ports are located in the expansion boards if they are installed in slots 0 ~ 2 of VP-2xW7/4xx7.
* ISaGRAF FAQ: www.icpdas.com > Support > FAQ > ISaGRAF Soft-Logic PAC   
* ICP DAS recommends using NS-205/NS-208 or RS-405/408 (Ring Switch) Industrial Ethernet Switches.  
VP-23W7-EN CR ISaGRAF based ViewPAC with 3.5" LCD and 3 I/O slots (OS: Multilanguage) (RoHS)
VP-23W7-TC CR ISaGRAF based ViewPAC with 3.5" LCD and 3 I/O slots (OS: Traditional Chinese) (RoHS)
VP-23W7-SC CR ISaGRAF based ViewPAC with 3.5" LCD and 3 I/O slots (OS: Simplified Chinese) (RoHS)
VP-25W7-EN CR ISaGRAF based ViewPAC with 5.7" Touch LCD and 3 I/O slots (OS: Multilanguage) (RoHS)
VP-25W7-TC CR ISaGRAF based ViewPAC with 5.7" Touch LCD and 3 I/O slots (OS: Traditional Chinese) (RoHS)
VP-25W7-SC CR ISaGRAF based ViewPAC with 5.7" Touch LCD and 3 I/O slots (OS: Simplified Chinese) (RoHS)
VP-4137-EN CR ISaGRAF based ViewPAC with 10.4" Touch LCD and 3 I/O slots (OS: Multilanguage) (RoHS)
VP-4137-TC CR ISaGRAF based ViewPAC with 10.4" Touch LCD and 3 I/O slots (OS: Traditional Chinese) (RoHS)
VP-4137-SC CR ISaGRAF based ViewPAC with 10.4" Touch LCD and 3 I/O slots (OS: Simplified Chinese) (RoHS)
VP-GUP-17000 Upgrade the VP-2xW1 to become VP-2xW7 (or Upgrade the VP-2xW9 to become VP-2xW6)
ISaGRAF Development Software
ISaGRAF-256 ISaGRAF Workbench Software Ver.3 (256 I/O Tags) with one USB Dongle
ISaGRAF-32 ISaGRAF Workbench Software Ver.3 (32 I/O Tags)
Note: No upgrade service from ISaGRAF-32 to ISaGRAF-256 is available.
(ISaGRAF-32 can be used to control more than 32 I/O tags. Please refer to Ch. 3.4 of the ISaGRAF User Manual.)
DP-660 24 VDC/2.5 A, 60 W and 5 VDC /0.5 A, 2.5 W Power Supply with DIN-Rail Mounting
DP-1200 CR 24 VDC/5.0 A, 120 W Power Supply with DIN-Rail Mounting (RoHS)
MDR-60-24 CR 24 VDC/2.5 A, 60 W Power Supply with DIN-Rail Mounting (RoHS)
NS-205 CR / NS-208 CR 5-port / 8-port Unmanaged Industrial 10/100 Ethernet Switch with Plastic Case (RoHS)
RS-405 CR / RS-408 CR 5-port / 8-port Real-time Redundant Ring Switch (RoHS)
TPM-4100 / TP-4100 10.4" (800 x 600) resistive touch panel monitor with RS-232 or USB interface